Set 7.5 Kw Servo Motor/Drive
1.QS6AA050M3 AC Servo Drive, 3Phase, AC380V, 50A,
match ACH series AC servo motor 3.7-11KW.
2.ACH-18750A3C 180 flange, 7.5KW, 1500RPM, 48.0NM, 20A, AC380V,
incremental encoder, 15 line,
match QS6AA050M3 servo driver
3.สาย 3 meter cable, includ Power cable, Encoder cable
and controller cable
QS6AA050M3 servo drive
QS6AA050M3 servo drive: built-in 4-position positioning control instructions, free planning point-to-point positioning control; servo motor comes with encoder, position signal feedback to the servo drive, and open-loop position controller together constitute a semi-closed-loop control system.
The
Functional characteristics
Motor power to adapt to 220V power input 100W ~ 3.7KW, 380V power input 3.7W ~ 11KW
with torque, speed, position, point to point positioning and hybrid switching function
Position control, speed control, torque control, electric knife control and JOG control a variety of control methods
Built-in braking system to meet the needs of large load applications
Built-in 4-position positioning control instructions, free planning Point-to-point positioning control
Servo motor comes with encoder, position signal feedback to the servo drive, The controller together to form a semi-closed-loop control system
speed ratio of 1: 5000, from low to high speed have a stable torque characteristics
Servo motor maximum speed up to 6000rpm
Control positioning accuracy ± 0.01%
Improved space vector control algorithm than ordinary SPWM produces greater torque, less noise
300% overload capacity, with a load capacity
Wide power supply Adaptation range: ~ 220V ± 20% or ~ 380V ± 20%
Perfect protection: overcurrent, overvoltage, overheating and coding Failure of a
variety of display functions: including motor speed, motor current, motor position, position deviation, the number of pulses, pulse frequency, linear speed
Automatic adjustment of input and output interface diagnostics, historical alarm recording, etc.
Through the inertial constant function of the new algorithm and 5 kinds of tuning characteristic selection, 30-level response setting or automatic saving function using parameters can improve the responsiveness Automatic tuning.
with torque, speed, position, point to point positioning and hybrid switching function
Position control, speed control, torque control, electric knife control and JOG control a variety of control methods
Built-in braking system to meet the needs of large load applications
Built-in 4-position positioning control instructions, free planning Point-to-point positioning control
Servo motor comes with encoder, position signal feedback to the servo drive, The controller together to form a semi-closed-loop control system
speed ratio of 1: 5000, from low to high speed have a stable torque characteristics
Servo motor maximum speed up to 6000rpm
Control positioning accuracy ± 0.01%
Improved space vector control algorithm than ordinary SPWM produces greater torque, less noise
300% overload capacity, with a load capacity
Wide power supply Adaptation range: ~ 220V ± 20% or ~ 380V ± 20%
Perfect protection: overcurrent, overvoltage, overheating and coding Failure of a
variety of display functions: including motor speed, motor current, motor position, position deviation, the number of pulses, pulse frequency, linear speed
Automatic adjustment of input and output interface diagnostics, historical alarm recording, etc.
Through the inertial constant function of the new algorithm and 5 kinds of tuning characteristic selection, 30-level response setting or automatic saving function using parameters can improve the responsiveness Automatic tuning.
