Set 750w Servo Motor/Drive
1.QS7AA020M AC Servo Driver, AC220V, 20A,
match ACH series AC servo motor 400W & 750W
2.ACH-08075DI-G 80 flange, 750W, 3000RPM, 2.4NM, 3.5A, AC220V,
incremental encoder, 15 line
match QS7AA020M servo driver
3.สาย 3 meter cable, includ Power cable, Encoder cable
and controller cable, 0.1-0.75KW
QS7AA020M
| Input Voltage | AC220V -15%～+10% |
| Driver Current | 20A |
| Matching Motor | ≤400W~750W motor |
| Using Temperature | Work：45℃ Storage：-40℃～55℃ |
| Relative Humidity | 40%~80% with no condensation |
| Atmosphere | 86-106kpa |
| Control Mode |
①Position control ②JOG control ③Speed control ④Torque control ⑤Position and speed control ⑥Inside pulse control ⑦Electric tool carrier control |
| Pulse Command | ①Pulse+ Direction ②CW + CCW Pulse ③ Two-phase AB orthogonal pulses |
| Control Precision | 0.01% |
| Response Frequency | ≤200Hz |
| Pulse Frequency | ≤500kHz |
| Speed Ratio | 1：5000 |
| Regenerative Brake | Internally Installed |
| Electronic Gear | 1/30000～30000/1 |
| Overload Capacity | ≤300% |
| Feedback Pulse | 2500p/r, frequency division can be set arbitrary within 0-128 |
| Display Function |
Rotate speed, motor current, motor torque, current location、positional deviation, command impulse count, current pulse frequency, space rate, I/O diagnose, analog input values, etc |
| Protection Function |
Over current, overvoltage, low voltage, overload, over heat, lack phase, over speed, ncoder abnormal, out of tolerance, mode abnormal alarm etc. |
|
13,900 บาท
|
|
|
